PT PrintaX Base 3D Resins

3D Printax resins for 3D printing on Phrozen or LCD / DLP printers

PT PrintaX BB Base Resin

-3D resin for printing total denture bases
-Biocompatible with high strength and low compression

-Printing of approximately 50 bases per 500g bottle
-Excellent level of detail
- 50 or 100 micron resolution
- Viscosity: 1180cps (25C)
Shore Shore Hardness: 87.25D
-Density: 1.17 g / cm3
-Flexural Resistance: 85.2MPa
-Modulus Flexural 2049MPa
-Water absorption: 26.5μg / mm3
-Solubility: <1 μg / mm3
-MMA residual monomer: 0%

-Colors and codes:
21-315 Printax BB Base Light Pink R1 500g
21-316 Printax BB Base Dark Pink R2 500g
21-305 Printax BB Base Light Pink R1 1000g
21-306 Printax BB Base Dark Pink R2 1000g

Observations

Cleaning with isopropyl alcohol: 3 - 5 minutes. Dry well before post curing.
BB Cure base post and CC tray: (60w oven - 405nm): 3 -5 cycles of 1 minute.
DD Guide Post Cure: 6 cycles of 1 minute. Interleaving the sides, without removing the supports. Perform post curing immersed in glycerin P.a.