Get to know our products.
3D Printax resins for 3D printing on Phrozen or LCD / DLP printers
PrintaX AA Temp Temporary Resin (A1, A2, A3, BL) - 500g - 21-312
PrintaX AA Temp Temporary Resin
-3D resin for printing temporary and temporary restorations
-Can be made up and characterized with the appropriate stains
-High surface hardness, biocompatible and low compression
-Ideal for LCD and DLP printers
-Printing of approximately 500 crowns per 500g bottle
-Excellent level of detail
- 50 or 100 micron resolution
Viscosity: 498 mPa.S (25C)
-Density: 1.11 g / cm3
Shore Shore Hardness: 84.65D
-Resistance: 82.35 MPa
-Elasticity: 1500 MPa
-Colors and codes:
21-312 Printax AA Temp A1 500g
21-313 Printax AA Temp A2 500g
21-314 Printax AA Temp A3 500g
21-310 Printax AA Temp BL 500g
Cleaning: Use spray with isopropyl alcohol or ultrasound for 3 - 5 minutes. Dry completely before post curing.
Post cure: 3 - 5 1 minute cycles in a photo oven with 405nm and 60W waves.
Tip: It is ideal to perform a glaze burn with Megaseal after finishing the post cure. Megaseal provides shine and pore closure on the surface, increasing the longevity of the restoration.